Industry & manufacturing
Standby protection for production lines and process equipment, or prime power where the grid is weak.
100–2000 kWParalleling
Power for the sites that cannot stop
The right generator set depends less on the industry than on the duty cycle: how often it runs, how much load it carries and how quickly it must take over. The eight sectors below cover the projects we quote most often on diesel, followed by the gas applications we build for.
Industry solutions
Eight sectors, one engineering approach.
We size the set from the load list, then select the enclosure and control system that match the site.
Healthcare
Emergency power for operating theatres, ICU and life-support equipment with fast automatic changeover.
ATS < 10 sSilent canopy
Data centres & telecom
N+1 standby for data halls, base stations and edge sites, with remote monitoring and alarms.
N+1Remote monitoring
Commercial buildings
Backup power for hotels, offices and shopping centres, keeping lifts, pumps and lighting running.
Auto startLow noise
Transport infrastructure
Power for airports, ports, toll stations and rail facilities where outages affect operations directly.
Harsh environmentEasy service
Construction & mining
Prime power for site offices, camps, crushers and dewatering, on trailer chassis where the site moves.
Prime dutyTrailer mount
Real estate & residential
Standby sets for residential towers and mixed-use developments, sized for lifts, pumps and emergency lighting.
WeatherproofAutomatic
Events & emergency response
Mobile power vehicles and trailer sets for utilities, public events and disaster recovery.
MobileFast deployment
Gas applications
Where gas sets earn their keep.
A gas set is chosen when the fuel is already on site and the load runs for thousands of hours a year. These are the projects where the fuel cost saving pays for the equipment.
Biogas plants & farms
Digester gas from livestock slurry, food waste and crop residues, turning a disposal cost into electricity and heat.
100–2000 kWBase load
Landfill & wastewater
Landfill gas and sewage gas engines with the desulphurisation and dehydration needed to keep them running for years.
Methane tolerantGas treatment
Food, drink & process plants
Process residues and wastewater converted on site, with the CHP package supplying the hot water and steam the plant already needs.
CHPWaste to energy
District heating & greenhouses
Base-load gas engines with heat recovery feeding district networks, greenhouses, hotels and industrial parks.
Heat recovery80%+ efficiency
Gas on site
Base-load power where the fuel already is.
Containerised gas modules for landfills, digesters, wastewater plants and industrial parks, delivered as a complete package with gas conditioning and heat recovery.
See the gas range
Duty ratings
Standby, prime or continuous?
The duty cycle changes the rating, the cooling package and the maintenance interval. Diesel sets are normally specified for standby or prime duty, gas sets for continuous base load. Tell us how the set will run and we size it accordingly.
Standby power
For mains failure only, with a limited number of running hours per year and no overload capability. The most common choice for buildings, hospitals and data centres.
Variable loadAuto start
Prime power
For sites without a reliable grid, running continuously with a 10% overload allowance for one hour in twelve. Typical for construction, mining and rental fleets.
Continuous hours10% overload
Continuous power
For base-load operation at a constant rating with no overload allowance, such as district power or remote industrial plants.
Base loadConstant rating
Critical facilities
Standby that starts when the grid does not.
For hospitals, data halls and process plants the set is judged on the first ten seconds after a mains failure, not on the day it is installed. We build these projects with automatic mains failure panels, battery chargers and block heaters so the unit is always ready to accept load.
- AMF panel with automatic changeover and mains sensing
- Coolant and lube oil heaters for reliable cold starts
- Acoustic canopy to protect the surrounding area from noise
- Monthly test-run schedules documented in the manual
Remote and mobile sites
Prime power that travels with the project.
When there is no grid to fall back on, the generator set becomes the power station. Trailer and vehicle-mounted units are built with larger fuel tanks, heavier air filtration and easier access for servicing in the field.
- Trailer or truck chassis with road lights and towing equipment
- Extended fuel capacity for long unattended shifts
- Heavy-duty air, fuel and oil filtration packages
- Spare parts kits shipped with the unit
Sizing checklist
What we need to quote accurately.
Send these five items and you will receive a correctly sized proposal rather than a rough estimate.
Load listMotor ratings and starting method, plus any UPS or soft-start equipment.
Voltage & frequencyFor example 400 V / 50 Hz, 480 V / 60 Hz, or a high voltage requirement.
Duty cycleStandby, prime or continuous, and the expected running hours per year.
Site conditionsIndoor or outdoor, ambient temperature, altitude and acoustic limits.
FuelDiesel, or natural gas, biogas or landfill gas with the analysis if you have it.
Also useful: the engine brand preferred in your market, the control system required, and the target delivery window.
Tell us how the set will be used.
Our engineers will confirm the rating, recommend the enclosure and issue a specification with pricing for your market.